盖茨皮带安装维护.pptVIP

Slide 32 If the sheave grooves have been coated with dirt or rubber debris, carefully remove this coating with a fast drying solvent. Be careful that there are no sharp nicks or gouges that may cause painful cuts to fingers or hands. Also, do not use any cleaner that leaves a residue that may impact belt performance and life. Slide 31 Carefully check sheave for nicks or gouges. These nicks often have extremely sharp edges that can cause painful and serious cuts. Always use gloves for this sheave inspection and proceed cautiously. If nicks or gouges are found, repair them if possible; repl