stp生成树(三台二层).pptxVIP

stp生成树(三台二层) 拓扑图 拓扑图 指定S1为根桥 S1(config)#spanning-tree vlan 1 priority 0 S1(config)#do sh sp This bridge is the root ---------------- ---- --- --------- -------- -------------------------------- Fa0/1 Desg FWD 19 128.1 P2p Fa0/2 Desg FWD 19 128.2 P2p 设置S0优先级为4096 Switch(config)#spanning-tree vlan 1 priority 4096 Switch(config)#do sh sp VLAN0001 Spanning tree enabled protocol ieee Root ID Priority 1 Cost 19 Port 1(FastEthernet0/1) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Brid