有限元大作业.pdfVIP

Assignments of Finite Element Assignment 1: beam element Give: In the beam, given the material=Steel, length L=1.0m, rectangular cross-section B=4.0 cm H=10.0 cm, a displacement U=30.0 cm is applied in y-direction at the end of the beam. Tasks: 1. Use the displacement and strain at the point 1 (L/2,0) to perform a mesh convergence study, plot the curves of displacement/strain vs. element number 2. Output the displacement, strain and stress distributions over the entire beam. Model Description: Element Type: Beam 193