三菱 内置主轴电机SJ-BG系列 规格操作说明书 英文.pdfVIP

Introduction Thank you for selecting the Mitsubishi numerical control unit. This instruction manual describes the handling and caution points for using this AC servo/spindle. Incorrect handling may lead to unforeseen accidents, so always read this instruction manual thoroughly to ensure correct usage. Make sure that this instruction manual is delivered to the end user. Always store this manual in a safe place. In order to confirm if all function specifications described in this manual are applicable, refer to the specifications for each CNC. Notes on Reading This Manual (1) Since the description of this specification manual deals with NC in general, for the specifications of individual machine tools, refer to the manuals issued by the respective machine tool builders. The restrictions and available functions described in the manuals issued by the machine tool builders have precedence to those in this manual. (2) This manual describes as many special operations as possible, but it should be kept in mind that items not mentioned in this manual cannot be performed. In this manual, the following abbreviations might be used. MTB: Machine tool builder Precautions for Safety Please read this manual and auxiliary documents before starting installation, operation, maintenance or inspection to ensure correct usage. Thoroughly understand the device, safety information and precautions before starting operation. The safety precautions in this instruction manual are ranked as WARNING and CAUTION. DANGER When there is a potential risk of fatal or serious injuries if handling is mistaken. WARNING When a dangerous situation, or fatal or serious injuries may occur if handling is mistaken. CAUTION When a dangerous situation may occur if handling is mistaken