三菱 直线电机规格使用说明书 英文.pdf

Introduction Thank you for selecting the Mitsubishi numerical control unit. This instruction manual describes the handling and caution points for using this AC servo/spindle.Incorrect handling may lead to unforeseen accidents, so always read this instruction manual thoroughly to ensure correct usage. Make sure that this instruction manual is delivered to the end user. Always store this manual in a safe place. In order to confirm if all function specifications described in this manual are applicable, refer to the specifications for each CNC. Notes on Reading This Manual (1) Since the description of this specification manual deals with NC in general, for the specifications of individual machine tools, refer to the manuals issued by the respective machine manufacturers. The restrictions and available functions described in the manuals issued by the machine manufacturers have precedence to those in this manual. (2) This manual describes as many special operations as possible, but it should be kept in mind that items not mentioned in this manual cannot be performed. (3) The characteristic values and numerical values without tolerances mentioned in this manual are representative values. Precautions for Safety Please read this manual and auxiliary documents before starting installation, operation, maintenance or inspection to ensure correct usage. Thoroughly understand the device, safety information and precautions before starting operation. The safety precautions in this instruction manual are ranked as WARNING and CAUTION. DANGER When there is a potential risk of fatal or serious injuries if handling is mistaken. WARNING When a dangerous situation, or fatal or serious injuries may occur if handling is mistaken. CAUTION When a dangerous s