三菱 数控系统通讯软件FCSB1224W000 参考手册 英文.pdf

INTRODUCTION Thank you for purchasing the Numerical Control (CNC) communication software FCSB1224W000. This users reference manual describes how to use the OLE/COM interface of FCSB1224W000. Read this manual before use to get familiar with and correctly use the functions of FCSB1224W000. Precautions for Safety (Read carefully before use.) Before using the product, read the users reference manual and other related manuals. Pay careful attention to safety when using the product. The safety instructions in this manual are intended for this product. Do not use this product until you have a full knowledge of general and safety information and precautions about the computerized numerical controller. In this manual, the safety instruction levels are classified into WARNING and CAUTION. When there is a great risk that the user could be subject to fatalities or serious DANGER ！危険 injuries if handling is mistaken. CAUTION When the user could be subject to medium or slight injuries or when physical ！注意 damage could occur if handling is mistaken. CAUTION ！注意 Note that even items ranked as , may lead to major results depending on the situation. In any case, important information that must always be observed is described. Keep this manual in a safe place for future reference. DANGER [Mechanical precautions] ！危険  When connecting the product with the computerized numerical controller, consider the risk of external power supply failure and computer malfunction, and install the external safety circuit as fail-safe of the entire system.  There is a risk of accident due to output error or malfunc