(2.16.1)--《知识拓展：船舶配积载》PPT讲义.pptVIP

Ship stowage Knowing stowage relevant knowledge 1 学习目标 Do you know how to make stowage plan? 课前一问 如何做好船舶配积载计划 Container ships sail with fixed route and schedule – liner shipping. They berth at pre-arranged ports. After berthing containers should be loaded and unloaded in accordance to stowage plan After the completion of unloading the ship shall depart to the next port Obtaining exact unloading/loading quantity and information at port Total number and types of container Destination port Special container information 01 02 03 如何做好船舶配积载计划 knowing about ship structure and stowage demand Which locations allow 20‘’container? Which locations allow 40‘’container? Reefer container and DG container have specific location to load 01 02 03 如何做好船舶配积载计划 Thave a clear container position plan the following information is needed: Container position plan 如何做好船舶配积载计划 箱位图 Locations with dark fan shape are fitting to 20‘’ containers only Rest of the locations can fit both 20‘’ and 40‘’ 如何做好船舶配积载计划 reefer containers needs socket DG container location selection should refer to IMDG regulations and adapt requirements Knowing the maximum amount each port allows to load/unload 如何做好船舶配积载计划 如何做好船舶配积载计划 Make stowage plan Make reasonable stowage plan according to ship’s load capacity, features, and actual container quantity Fuse of slots’ capacity 船舶预配图制作工作需要遵循的原则 First, slots’ capacity need to be fully used in accordance to cabin and cabin’s maximum loading capacity. Preventing slots’ waste and incorrect loading is needed 船舶预配图制作工作需要遵循的原则 As shown in the picture, the left side corner with lines are locations for tall containers. If 9 layers height are needed, maximum two layers of tall containers can be placed. If tall containers exceed three layers, maximum 8 layers height can be made to prevent waste. Concept 1: full use of slots’ capacity 船舶预配图制作工作需要遵循的原则 Concept 2:try best to prevent cargo overstuck at ports The same space should try to load with cargo unloading at the same port to prevent