测量系统分析概论.ppt

The attribute gage study requires 30 samples. As you will see later, the variable gage study only requires 10 samples. This is due to the higher information content of variable data. The output of an attribute RR is an estimate of the fraction of times that the gage (or inspector) is consistent and correct, according to a standard We can improve visual inspection with visual standards. The goal for effectiveness of inspectors should always be 100%. This means your true effectiveness is probably something less than 100% and will degrade with time. We find in industry that it is very difficult to keep our inspection processes performing above 80% effectiveness. Some issue to consider may be poor lighting conditions, eye sight of the inspectors, availability of visual standards, regular training, inspector turnover issues, product changes, customer specification modifications, etc. We can improve visual inspection with visual standards. The goal for effectiveness of inspectors should always be 100%. This means your true effectiveness is probably something less than 100% and will degrade with time. We find in industry that it is very difficult to keep our inspection processes performing above 80% effectiveness. Some issue to consider may be poor lighting conditions, eye sight of the inspectors, availability of visual standards, regular training, inspector turnover issues, product changes, customer specification modifications, etc. We can improve visual inspection with visual standards. The goal for effectiveness of inspectors should always be 100%. This means your true effectiveness is probably something less than 100% and will degrade with time. We find in industry that it is very difficult to keep our inspection processes performing above 80% effectiveness. Some issue to consider may be poor lighting conditions, eye sight of the inspectors, availability of visual standards, regular training, inspector turnover issues, product changes, customer specification modific