AC_20-158A 在高强度辐射场(HIRF)环境下运行的飞机电气和电子系统认证.pdfVIP

Advisory U.S. Department of Transportation Circular Federal Aviation Administration Subject: The Certification Date: 05/30/14 AC No: 20-158A of Aircraft Electrical and Initiated by: AIR-130 Electronic Systems for Operation in the High-intensity Radiated Fields (HIRF) Environment 1. Purpose. a. This advisory circular (AC) will provide you with information and guidance on how to show compliance with Title 14, Code of Federal Regulations (14 CFR) 23.1308, 25.1317, 27.1317, and 29.1317, High-intensity Radiated Fields (HIRF) Protection. b. This AC is not mandatory and does not constitute a regulation. It describes an acceptable means, but not the only means, for you to show compliance with the requirements for protection of the operation of electrical and electronic systems on an aircraft when the aircraft is exposed to an external HIRF environment. If you use the means described in this AC, you must follow it entirely to comply with this AC. The term “must” is used to indicate mandatory requirements when following the guidance in this AC. The term “should” is used when following the guidance is recommended but not required to comply with this AC. c. This AC updates AC 20-158 to include the latest revision of SAE ARP 5583A (and EUROCAE document ED-107A), Guide to Certification of Aircraft in a High Intensity Radiated Field (HIRF) Environment, June 2010. d. AC 20-158, The Certification of Aircraft Electrical and Electronic Systems for Operation in a High-Intensity Radiated Field (HIRF) Environment, dated July 30, 2007, is cancelled. 2. Applicability. This AC applies to all applicants for a new type certificate (TC) or a change to an existing TC when the certification basis requires you to address the HIRF certification requirements of 14 CFR 23