TLD2252-2EP 英飞凌芯片 INFINEON 中文版规格书手册.pdfVIP

TLD2252-2EP LITIX™ Basic+ Features • Dual channel device with integrated and protected output stage (current source), optimized to drive LEDs as additional low cost current source • Optimized for low cost combined “stop”/ “tail” function in Rear Combination Light (RCL) • Asymmetric output stages to enhance luminosity control for different functions • High output current (up to 120 mA) • Very low current consumption in sleep mode • Very low output leakage when channel is “off” • Low current consumption during fault • Independent output currents’ control via low power resistors • Additional output current demand supported by LITIX™ Companion direct drive • PWM engine supports digital dimming with very high accuracy • Intelligent fault management: up to 16 devices can share a common error network with only one external resistor • Reverse polarity protection allows reduction of external components and improves system performance at low battery/input voltages • Overload protection • Wide temperature range: -40°C TJ 150°C • Output current control via external low power resistor • Green product (RoHS compliant) Potential applications • Cost effective “stop”/ “tail” function implementation with shared and separated LEDs per function • Turn indicators • Position, fog, rear lights and side markers • Animated light functions like wiping indicators and “welcome/goodbye” functions • Day Running Light • Interior lighting functions like ambient lighting (including RGB color control), illumination and dash board lighting • LED indicators for industrial applications and instrumentation Datasheet Rev. 1.00 1 2019-09-26