(3.2)--有门摄影课针孔相机模版.pdfVIP

Dirkon – the paper camera you have to place the camera on a fi rm base and it mustn’t Cut-out pinhole camera, published in 1979 in the magazine be moved at all when handling the shutter. And now for An ABC of Young Technicians and Natural Scientists the instructions on how to put the camera together. in former Czechoslovakia. Created by: Martin Pilný, First you take an offi ce paper clip and bend it as Mirek Kolář and Richard Vyškovský. indicated in the drawing (25). Then you make cut-outs in sections 1, 2, 7, 11, 13 and 24. Now take part 10 and, using A few notes about the original instructions a press stud (popper), fi x it to your completed section 1 at The camera must be cut out of stiffer paper than ordinary point A, where you make a tiny hole with a small nail. Put offi ce paper (or thin card). If the paper isn’t entirely opaque, section 1 together, attach the small side boxes (sections you need to stick very thin black paper underneath the 2, 3) which will have been made beforehand. These boxes important sections so that no light gets into the camera. This serve as containers for the fi lm rolls. Stick section 12 is particularly important for sections 1, 2, 3, 10 and 23. together and attach it to section 2. Then section 24 to 3. It is very important to print the cut-out to the correct From sections 4, 5 and 6 make a fake view-fi nder for the size, i. top and place it onto the main section 1. e. 1 : 1. When you are printing from the Acrobat Reader, the option “Fit to page” MUST NOT be sele