难加工材料铣削加工刀具磨损建模技术研究的开题报告.docxVIP

难加工材料铣削加工刀具磨损建模技术研究的开题报告 【摘要】 本文主要研究了难加工材料（如高温合金、钛合金等）铣削加工过程中刀具的磨损规律及磨损模型建立的技术研究。通过对铣削加工中切削力、表面粗糙度、刀具寿命等因素的分析，建立了刀具磨损模型，并采用实验数据对模型进行验证。 研究表明，难加工材料铣削加工过程中，切削力的大小受到刀具径向刃前角、刀具前刃刃角、切削深度等因素的影响，而刀具磨损的程度则受到切削力、加工时间、材料性质等因素的影响。针对以上因素，本文建立了刀具磨损模型，并通过MATLAB软件进行模拟分析，验证了模型的准确性。 本文的研究结果具有一定的理论和实际意义，为难加工材料铣削加工过程中的刀具磨损控制和预测提供了科学的理论基础和实用的技术手段。 【关键词】难加工材料；铣削加工；刀具磨损；磨损模型 【Abstract】 This paper mainly studies the technical research on the wear law and wear model establishment of cutting tools in the milling process of difficult-to-machine materials (such as high-temperature alloys, titanium alloys, etc.). Through analysis of cutting forces, surface roughness, tool life and other factors in milling machining, a tool wear model is established, and the model is verified by experimental data. The research shows that in the milling process of difficult-to-machine materials, the cutting force is affected by factors such as the radial rake angle of the tool, the front edge angle of the tool, and the cutting depth, while the degree of tool wear is affected by factors such as cutting force, machining time, and material properties. For the above factors, this paper establishes a tool wear model and simulates and analyzes it with MATLAB software to verify the accuracy of the model. The research results of this paper have certain theoretical and practical significance, and provide a scientific theoretical basis and practical technical means for the control and prediction of tool wear in the milling process of difficult-to-machine materials. 【Keywords】difficult-to-machine materials; milling machining; tool wear; wear model