基于增压缸增压原理的钻井封井器试压装置设计.docxVIP

2011年10月 第39卷第20期 机 床 与 液 压 MACHINE TOOL HYDRAULICS 0ct.2011 Vol.39 No.20 DOI: 10.3969/j.issn.1001-3881.2011.20.018 基于增压缸增压原理的钻井封井器试压装置设计 刘永旺,管志川,魏文忠2,苗同勇3,赵伟3 (1. 中国石油大学(华东)石油工程学院，山东青岛266555; 2. 中国石化胜利石油管理局，山东东营257001; 3. 胜利石油管理局渤海钻井公司管具公司，山东东营257200) 摘要：对维修过或者新购置来的井控装置——钻井封井器进行试压是保证该装置安全进行的必要条件。常用的封井器 试压打压装置由于打压慢、设备检修复杂、工作稳定性差等自身条件限制，不能满足工作量越来越多、工作环境要求越来 越严格、工作效率越来越高的需要。根据增压缸增压原理设计了一套钻井封井器试压打压装置，对装置的整体结构及原 理、关键参数的计算及装置存在的优点进行了介绍及分析。结果表明：根据该原理设计出的试压装置能够满足试压工艺的 需要，且占用空间小、使用方便、便于安装和维护等，具有可观的经济效益和社会效益。 关键词： 封井器；试压；增压缸 中图分类号： TH137.51;TE931+.1 文献标识码： A 文章编号：1001-3881(2011)20-049-3 Design of the Drilling Blowout Preventer Pressure Test Device Based on the Supercharged Principle of Pressurized Cylinder LIUYongwang,GUAN Zhichuan,WEI Wenzhong2, MIAO Tongyong3, ZHA0.Wei3 (1.College of Petroleum Engineering, China University of Petroleum, Qingdao Shandong 266555, China; 2. Shengli Petroleum Administration Bureau of SINOPEC, Dongying Shandong 257001,China; 3. Bohai Drilling Tube Tools Company, Shengli Petroleum Administration Bureau, Dongying Shandong 257200,China) Abstract: Pressure test on the newly acquired drilling blowout preventer or just be repaired is a necessary condition for drilling safety. Common drilling blowout preventer pressure test device can not meet the present needs of workload, work environment and work efficiency, because these devices have flaws such as suppressed slowly, equipment maintenance complexly, poor job stability and other self-limited. Based on the supercharged principle of pressurized-cylinder, a drilling blowout pressure test device was de- signed, and the device structure and principle, the key parameters calculations and merits of the design were described. The results show that the pressure test device base on this principle can meet the needs of pressure test, and has advantages such as small volume of space, easy to use, easy to install and maintain, etc. It ha