电池后盖塑料注塑模具设计 .docVIP

PAGE I PAGE I 本科毕业设计（论文） 题目：电池后盖塑料模具设计 电池后盖塑料模具设计 摘 要 这篇文章是关于塑料制件的注射模具的设计，主要内容包括塑件的成型工艺分析，模具结构的确定，分型面位置，在形式的浇注系统，零件设计计算形成的结构，模板及标准件的选择，导向机构的设计，推出脱模机构等 在正确分析和材料性能的塑料制品的工艺特点，包括模具结构，模具的强度和寿命计算和熔融塑料的流动预测复杂工程运行中存在的问题，如；使用不同的软件，如CAD，3D软件分别对模具的设计，制造和产品质量进行了分析。塑料注射模具设计，采用一般精度，使用CAD软件，3 d的成型注塑模具，零件的设计或分析浇注系统，引导部分和脱模机构等等。本专业的基础上综合运用，专业课知识设计，其核心知识是塑料成型模具，材料成型技术基础，机械设计，塑料成型技术，计算机辅助设计，模具CAD／CAM／CAE等 关键词：注塑模具,标准件,脱模推出机构. PAGE II PAGE II Battery back cover plastic mold design Abstract This article is about the design of the injection mold of plastic parts. The main contents include the molding process analysis of the plastic parts, the determination of the mold structure, the position of the parting surface, the structure, the form and the standard of the casting system and the parts design and calculation The selection of the guide mechanism, the introduction of the stripping mechanism and so on In the correct analysis and material properties of plastic products, including the characteristics of the mold structure, mold strength and life calculation and the flow of molten plastic to predict the problems of complex engineering operations, such as the use of different software such as CAD, 3D software The mold design, manufacturing and product quality were analyzed. Plastic injection mold design, the use of general accuracy, the use of CAD software, 3 d molding injection mold, the design or analysis of parts casting system, guide part and stripping mechanism and so on. The core knowledge is the plastic molding mold, the material forming technology foundation, the mechanical design, the plastic molding technology, the computer aided design, the mold CAD / CAM / CAE et al. Key Words: Formwork;Standard parts;Stripping out institution design PAGE PAGE IV 目 录 TOC \o 1-3 \h \u 14215 1 绪论 1 8598 1.1注塑成型简介 1 15111 1.2注塑行业存在的主要问题 1 27909 1.3国内外模具的现状及发展趋势情况 1 3208 1.4鼠标注射模具的现状 3 15418 2 鼠标底座的工艺性分析 4 13920 2.1塑件的外形结构 4 20587 2