圆形插头壳体注塑成型工艺与模具设计说明书.docVIP

哈尔滨工业大学工学硕士学位论文 - PAGE II - - PAGE VI - 圆形插头壳体注塑成型工艺与模具设计 摘要 模具的发展水平往往代表着各个国家的工业发展水平，此次设计中的塑料模也是其中一个缩影。此次设计的圆形插头壳体的塑料模具设计通过联系在校学习的知识，查阅了大量的资料以及文献，最终确定了模具设计的整个方案，根据产品的使用要求选择了合适的材料。 针对圆形插头中的侧孔，选择了合适的分型面，设计了侧向抽芯机构保证侧孔的顺利成型。各个机构中的零件根据其使用要求进行了详细的计算以及分析，最终确定了零件的材料以及合适的工艺，最后完成整个模具的装配设计。通过对各个零件进行了二维图的绘制以及采用UG软件进行三维的建模以及运动仿真，最后将整套模具顺利设计完成 关键词： 注射模；侧抽芯机构；分型面 Abstract The development level of mold often represents the industrial development level of each country, the plastic mold in this design is one of the epitome. The design of the circular plug shell plastic mold design through the contact of school learning knowledge, consult a large number of materials and literature, the final determination of the mold design scheme, according to the use of the product requirements to choose the appropriate materials. For the side hole in the circular plug, the suitable parting surface is selected, and the side core-pulling mechanism is designed to ensure the side hole is formed smoothly. The parts in each mechanism are calculated and analyzed in detail according to the requirements of their use, and the materials and appropriate process of the parts are finally determined. Finally, the assembly design of the whole mold is completed. The 2d drawing of each part and the 3d modeling and motion simulation with UG software were carried out. Key words: injection mold; Side core-pulling mechanism; Parting surface 目录 24881_WPSOffice_Level1 目录 1 17682_WPSOffice_Level1 1绪论 1 5631_WPSOffice_Level2 1.1 课题背景 1 5948_WPSOffice_Level2 1.2 毕业设计的主要研究目标及内容 2 14952_WPSOffice_Level1 2注塑件材料的工艺分析 5 4969_WPSOffice_Level2 2.1 塑料制品的设计分析 5 23371_WPSOffice_Level2 2.2 塑件体积和质量 6 31655_WPSOffice_Level2 2.3 材料特性 7 8315_WPSOffice_Level2 2.4 脱模斜度 9 5751_WPSOffice_Level2 2.5 塑件的壁厚 10 25737_WPSOffice_Level2 2.6 本章小结 11 4593_WPSOffice_Level1 3 模具设计 12 3025_WPSOffice_Level2 3.1 型腔数量的确定与配置 12 32025_WPSOffice_Level2 3.2 注射机的选用 13 7414_WPSOffice_Level2 3.3 模架的确定 16 28915_WPSOffice_Level2 3.4 成型零部件的工作尺寸计算 18