机械设计说明书—工具锤装柄机液压系统设计.docVIP

PAGE 25 本科毕业设计(论文) 题目：工具锤装柄机液压系统设计  PAGE PAGE VI 工具锤装柄机液压系统设计 摘 要 随着五进出口产品出口增长，对产品质量要求愈趋严格。作为出口量较大的工具锤，其质量要求更为严格。工具锤装柄机具有方便快捷、有效解决手工装柄中出现的锤柄不正、锤柄端部变形等特点。本文分析了工具锤装柄机的工作原理及结构。工具锤装柄机的工作过程包括：锤柄压入锤头，铆钉压入锤柄，压钉液压缸回程，压柄液压缸回程。针对压柄液压缸与压锤液压缸的设计是实现整个工具锤装柄机工作的基础，重点设计了压柄液压缸与压锤液压缸的结构。并根据系统压力、流量选择了液压阀、电机、泵。本文的设计能够满足工具锤装柄机要求(系统压力10MPa，功率4kW，整机质量12kN，每分钟循环4-6次)有效解决手工装柄中出现的锤柄不正、锤柄端部变形等问题。 关键词：装柄机；液压元件；工具锤；锤柄；支撑架 The Design of Hydraulic System for Tool Hammer?Mounted?Handle Machine Abstract With the growth of exports for the import and export five increasingly string entre quarrymen on product quality. Export a large amount of tools, hammers, and its more stringent quality requirements. Tool hammer mounted handle machine has a convenient and effective solution to the hammer handle errors, and the hammer handle end of the deformation characteristics appear in the hand-mounted handle. This paper analyzes the working principle and structure of the tool hammer mounted handle machine. Tool hammer mounted handle the work process, including: pressure hammer handle into the hammer head, rivets pressed into the hammer handle, the pressure to nail the hydraulics Linder return, press the handle hydraulic cylinder return. The entire tool hammer mounted handle machine work for the press handle the hydraulic cylinder and pressure hammer hydraulic cylinder design is focused on the design of the press handle the hydraulic cylinder and pressure hammer hydraulic cylinder structure. According to the system pressure, flow selection of hydraulic valves, motors, pumps. This article is designed to meet the tool hammer mounted handle machine (system pressure of 10MPa, the power of4kW, machine weight 12kN per minute cycle 4-6 times) is an effective solution to the deformation of the hammer handle errors, hammer handle end in the hand-mounted handle problem. Key Words：?handle?mounted?machine;?hydraulic components;?tool?hammer;?hammer handle;?Bracket 主要符号表 D