管道工程识图与施工工艺复习资料.docVIP

管道工程识图与施工工艺复习资料 一、管道轴测图画法举例 根据立面图平面图画轴测图 口诀:根据立面图画:上下左右不变，前后变成45?线 supervision upon the acceptance of electric hoist can be installed before installation check before leaving the factory the factory information, including factory certificate, inspection reports and so on whether met with factory-installed condition. Its installation, only to release the running gear, running gear wheel can be fixed on the track under the steel flange, and power lines running. 1) before the installation, must be fully informed of the manufacturer for the installation of electric hoists on technical performance, usage, installation instructions. 2) after the transfer of equipment, electric hoist track embedded parts design or installation, the hoist should be first buried track and all its components, structural Assembly, or mechanical Assembly such as checking ... Check the cleaning machine parts are manufactured in the factory are complete, each component has any damage in transport, during storage ... Check all parts installed at the Assembly tag belongs to the cleaning machine parts. Anyone who does not belong to the cleaning machine parts or assemblies, not the Assembly together ... Found in the Assembly to check damage, defects or missing parts, repair should be carried out, padded er ... Found in the Assembly to check damage, defects or missing parts, repair should be carried out, paddedtogethongs to the cleaning machine parts. Anyone who does not belong to the cleaning machine parts or assemblies, not the Assembly re complete, each component has any damage in transport, during storage ... Check all parts installed at the Assembly tag beltory astructural Assembly, or mechanical Assembly such as checking ... Check the cleaning machine parts are manufactured in the fac, electric hoist track embedded parts design or installation, the hoist should be first buried track and all its components, pmentthe installation of electric hoists on technical performance, usage, installation