内置蜂窝芯冷弯薄壁型钢组合墙体受剪性能研究.pdfVIP

第44卷 增刊1 2023年7月 建筑结构学报　 Journal of Building Structures Vol.44 Suppl.1July2023 032 文章编号:1000-6869(2023)S1-0282-11 DOI:10.14006/ j.jzjgxb.2023.S1.0032 内置蜂窝芯冷弯薄壁型钢组合墙体受剪性能研究 张壮南,钱浩凯,王春刚,张　 萌,杨振宇 (沈阳建筑大学土木工程学院,辽宁沈阳110168) 摘要:为研究内置蜂窝芯冷弯薄壁型钢组合墙体的受剪性能,对5 片墙体进行了水平低周往复加载试验,并利用有限元软 件ABAQUS对该墙体的受剪性能进行了参数分析,研究了导轨处螺钉布置、单个蜂窝的平直段长度以及蜂窝芯板厚度和龙 骨厚度等对墙体受剪性能的影响,分析了墙体的传力机制、破坏模式、承载能力、抗剪刚度、滞回特性及耗能能力等。 结果 表明:内置钢蜂窝芯可以起到较好的蒙皮作用,有效提高组合墙体的受剪承载力和抗剪刚度;立柱截面旋转90°后增强了骨 架与面板的相互约束,限制了立柱的扭转与屈曲变形,提升了骨架的抗侧移能力;外覆面板和立柱可以有效约束蜂窝芯板 面外屈曲变形,从而提升墙体受剪承载力、抗剪刚度和耗能能力,并改善延性;导轨处螺钉布置及蜂窝芯板和龙骨厚度对墙 体受剪性能影响显著,但蜂窝的平直段长度对其影响不大。 最后,基于试验和有限元分析结果,拟合了该墙体的受剪承载 力计算式,其计算结果与试验值吻合较好。 关键词:冷弯薄壁型钢组合墙;内置蜂窝芯;低周往复加载试验;有限元分析;失效机制;受剪性能 中图分类号:TU392.1　 　 文献标志码:A Study on shear performance of cold-formed steel composite walls with built-in honeycomb sandwich ZHANGZhuangnan,QIAN Haokai,WANG Chungang,ZHANG Meng,YANGZhenyu (School of Civil Engineering,ShenyangJianzhu University,Shenyang 110168,China) Abstract:Inordertostudytheshearperformanceofhoneycombsandwichcold-formedsteelcompositewalls,fivewalls were tested under cyclichorizontalloads,andtheshearperformanceofwallswasanalyzedbyABAQUS. Theeffectsof the screw arrangement at tracks,the straight segment length of a singlehoneycomb,andthethicknessesof honeycomb sandwich plates and keel on the shear performance of wallswere analyzed. Theforce transmission mechanism,failure modes,bearing capacity, shear stiffness, hysteresis characteristics and energy dissipation capacity of walls were analyzed. The results show that the built-in steel honeycomb sandwich can play a better role as a skin,effectively improving shearbearingcapacity and shear stiffnessof thecompositewall. Afterthe sectionof studsisrotatedby