MT检测工艺完整版.doc

PAGE Class I QG/SZ04.202R0 August 7, 2007 磁 粉 检 验 工 艺 规 程 MT Procedure For Vestas Wind turbines 阿尔斯通四洲电力设备（青岛）有限公司 Alstom Sizhou Electric Power Equipment (Qingdao) Co. Ltd. 名字 NAME 部门 EPARTMENT 签字 SIGNATURE 编制 AUTHOR(S): Quality Dpt 审核REVIEWED BY : NDT Level III 批准APPROVED BY : 工艺名称Name of procedure: MT Procedure steelwork and welding of towers for Vestas wind turbines QG/SZ04.202R0 APPLICATION DATE 应用日期 : REPLACES 替换日期: NUMBER OF PAGES 页数 : 发送部门DISTRIBUTION 发送名单TARGET LIST : 翻译TRANSLATION 翻译确认 VALIDATOR OF TRANSLATION 如果此文件需翻译 if the document is translated 参考文件 Source Reference Document 语言索引Language Index 确认日期Validation Date 页数Number of Pages 名字 Name 组 Group 签字Signature 孙洪彬Sun Hongbin Item-no.?:QG/SZ04.202R0 MT PROCEDURE Date?: August 7, 2007 Steelwork and welding of towers Class?: II Issued by?:Qu Sen for Vestas wind turbines Type?: NDT Procedure 目录Table of content 1.适用范围Scope 2.参考文献References 3.人员资质Qualification of personnel 4检测范围Extent of examination 5检测设备Equipment 6表面处理Surface treatment 7检测技术Examination techniques 8缺陷判断 Evaluation of Indications 9接受标准 Acceptance level 10报告 Reporting Item-no.?:QG/SZ04.202R0 MT PROCEDURE Date?: August 7, 2007 Steelwork and welding of towers Class?: I Issued by?:Qu Sen for Vestas wind turbines Type?: NDT Procedure Page PAGE 1 of 8 1适用范围 Scope 本规程适用于Vestas V80项目电力风塔塔架所有焊缝和铁磁性材料（平台支架、扶梯支架、维修的表面等）的磁粉检验。This procedure applies to MT examination of all welds and ferromagnetic materials of wind towers of Vestas V80 project (platform brackets, ladder brackets, repair of surface etc.) 1.2 磁粉检验方法适用于在铁磁性材料表面或其附近探测裂纹和其它不均匀性缺陷。 This is a nondestructive method of inspection to determine the existence and extent of surface and near surface cracks in ferromagnetic materials. 1.3 本规程适用于磁轭湿粉连续磁化法技术。此法仅适用于检出工件表面开口缺陷。 We