非常好的关于减速机及齿轮啮合的资料.pptxVIP

How stuffworks In this case Gear Units All information are taken from the Internet page http://science.how /gear-ratio.htm Source: http://science .how stuffworks .com/gear-ratio .htm Page 1 von 34 TECHNICAL INFORMATION : GEARS HOW DIFFERENT GEARS WORK Source: http://science how stuffworks com/gear-ratio htm Page 1 von 34 The different kind of Gears SPUR GEAR is used when shafts (white) must rotate in the same plane. The teeth are straight and parallel to the shaft. The pinion (yellow) is the smaller of a gear pair. how stuffworks htm h / / v / S t t t i i P 4 3 p g g 1 m u n r r r n a a a o o o o c c c c e e e e e s : : The different kind of Gears INTERNAL GEAR allows the pinion (yellow) to rotate on the inside of a ring type gear with straight teeth on its inner surface. This is a type of spur gear in which both the pinion and the gear turn in the same direction, unlike ordinary spur gears. Source: http://science .how stuffworks .com/gear-ratio .htm Page 1 von 34 The different kind of Gears HELICAL GEAR has curved teeth at an angle to the shaft. These teeth grip with less noise than straight teeth, especially when they are turning at high speeds. Source: http://science how stuffworks com/gear ratio htm Page 1 von 34 The different kind of Gears HERRINGBONE GEAR has teeth that are V- shaped, like a double helical gear. The shafts rotate in opposite directions as in an ordinary spur gear.. Source: http://science how stuffworks com/gear-ratio htm