ASTM E468-11美国材料与试验协会标准.pdfVIP

Designation:E468−11

StandardPracticefor

PresentationofConstantAmplitudeFatigueTestResultsfor

MetallicMaterials1

ThisstandardisissuedunderthefixeddesignationE468;thenumberimmediatelyfollowingthedesignationindicatestheyearof

originaladoptionor,inthecaseofrevision,theyearoflastrevision.Anumberinparenthesesindicatestheyearoflastreapproval.A

superscriptepsilon(´)indicatesaneditorialchangesincethelastrevisionorreapproval.

1.Scope3.2criterionoffailure—completeseparation,orthepres-

1.1Thispracticecoversthedesirableandminimuminfor-enceofacrackofspecifiedlengthvisibleataspecified

mationtobecommunicatedbetweentheoriginatorandtheusermagnification.Othercriteriamaybeusedbutshouldbeclearly

defined.

ofdataderivedfromconstant-forceamplitudeaxial,bending,

ortorsionfatiguetestsofmetallicmaterialstestedinairandat3.3run-out—nofailureataspecifiednumberofloading

roomtemperature.cycles.

NOTE1—PracticeE466,althoughnotdirectlyreferencedinthetext,is

4.SignificanceandUse

consideredimportantenoughtobelistedinthisstandard.

4.1Fatiguetestresultsmaybesignificantlyinfluencedby

2.ReferencedDocumentsthepropertiesandhistoryo