ASTM E546-14美国材料与试验协会标准.pdfVIP

Designation:E546−14

StandardTestMethodfor

Frost/DewPointofSealedInsulatingGlassUnits1

ThisstandardisissuedunderthefixeddesignationE546;thenumberimmediatelyfollowingthedesignationindicatestheyearof

originaladoptionor,inthecaseofrevision,theyearoflastrevision.Anumberinparenthesesindicatestheyearoflastreapproval.A

superscriptepsilon(´)indicatesaneditorialchangesincethelastrevisionorreapproval.

ThisstandardhasbeenapprovedforusebyagenciesoftheU.S.DepartmentofDefense.

1.Scope3.Terminology

1.1Thistestmethoddescribesalaboratoryprocedurefor3.1Definitions—Fordefinitionsofgeneraltermsusedinthis

determiningthefrost/dewpointwithintheairspace(s)oftestmethod,refertoTerminologyE631.

sealedinsulatingglassunits,andestablishesthecriteriafor3.2DefinitionsofTermsSpecifictoThisStandard:

determiningwhetherthatpointisbeloworaboveagivenor3.2.1frost/dewpoint,n—thetemperatureatwhichwater,

specifiedtemperature.organicvapor,orotherchemicalsbegintoappearonthe

1.2Thistestmethodalsodescribestheapparatustobeusedinteriorglasssurfaceofasealedinsulatingglassunitincontact

forthesedeterminations.withthemeasuringsurfaceofthefrost/dew-pointapparatus.

1.3Thevaluesstatedininch-poundunitsaretoberegarded3.2.2froststate—thecasewherethefrost/dewpointofa

asstandard.Theval