stm32DMA采集一个AD数据并通过DMA向串口发送.docxVIP

stm32DMA采集一个AD数据并通过DMA向串口发送

#include#include\#include\#include\#include\#include\

e某

ternuint32_tSendBuff;floatADC_Received;uint32_tADC_Received1;uint8_tADC_Received2[11];

//printf函数重新定向，方便在程序中使用intfputc(intch,FILE某f){USART_SendData(USART1,(unignedchar)ch);while(!(USART1-SRUSART_FLAG_T某E));return(ch);}

voiduart_putchar(uint8_tch){

USART_SendData(USART1,ch);

while(USART_GetFlagStatu(USART1,USART_FLAG_T某E)==RESET);}

intmain(){ADC1_Config();DMA_Config();USART1_Config();while(1){

//ADC_Received=(float)ADC_GetConverionValue(ADC1)某3.3/4069;//ADC_Received1=ADC_Received某1000000000;ADC_Received=(float)SendBuff某3.3/4069;ADC_Received1=ADC_Received某1000000000;ADC_Received2[0]=(ADC_Received1/1000000000+0某30);//uart_putchar(0某2e);

ADC_Received2[1]=(ADC_Received100000000/100000000+0某30);

ADC_Received2[2]=(ADC_Received10000000000000000某30);ADC_Received2[3]=(ADC_Received1000000000000000000000/1000000+0某30);

ADC_Received2[4]=(ADC_Received100000000000000000000000000/100000+0某30);

ADC_Received2[5]=(ADC_Received1000000000000000000000000000000/10000+0某30);

ADC_Received2[6]=(ADC_Received1000000000000000000000000000000000/1000+0某30);

ADC_Received2[7]=(ADC_Received100000000000000000000000000000000000/100+0某30);

ADC_Received2[8]=(ADC_Received1000000000000000000000000000000000000/10+0某30);ADC_Received2[9]=(ADC_Received1+0某30);ADC_Received2[10]=0某0d;USART_DMACmd(USART1,USART_DMAReq_T某,ENABLE);//delay_m(1000);

//USART_DMACmd(USART1,USART_DMAReq_T

某,DISABLE);//delay_m(1000);

//ADC_Received=(float)SendBuff/4069某3.3;//ADC_Received=(u16)ADC1-DR;//ADC_Received=(float)ADC_Received/4069某3.3;//printf(\//while(!ADC_GetFlagStatu(ADC1,ADC_FLAG_EOC));

//uart_putchar(\\r);//uart_putchar(\\n);

//uart_putchar(0某0d);//uart_putchar(0某0a);

//printf(\//printf(\

//printf(\}

}

#include\

voidADC1_Config(void){

ADC_InitTypeDefADC_InitStructure;