【英语版】国际标准 ISO 29945:2016 EN 冷冻非石油类液化气体燃料 二甲醚(DME) 陆上码头人工采样方法 Refrigerated non-petroleum based liquefied gaseous fuels — Dimethylether (DME) — Method of manual sampling onshore terminals.pdf
- 0
- 0
- 2024-07-28 发布于四川
-
正版发售
- 现行
- 正在执行有效期
- | 2016-11-07 颁布
- 1、本标准文档预览图片由程序生成,具体信息以下载为准。
- 2、本网站所提供的标准文本仅供个人学习、研究之用,未经授权,严禁复制、发行、汇编、翻译或网络传播等,侵权必究。
- 3、本网站所提供的标准均为PDF格式电子版文本(可阅读打印),因数字商品的特殊性,一经售出,不提供退换货服务。
- 4、标准文档要求电子版与印刷版保持一致,所以下载的文档中可能包含空白页,非文档质量问题
查看更多
ISO29945:2016ENRefrigeratednon-petroleumbasedliquefiedgaseousfuels-冰冷的非石油类液化气液体燃料,亚甲醚(DME),陆上终端的手采样本方法
详细解释如下:
ISO29945是一个国际标准,它规定了如何手动采集和处理来自非石油类液化气燃料(RNeP)的亚甲醚(DME)样本。这个标准是为了确保在处理和评估这些样本时,有统一和一致的方法,从而提供更准确和可靠的评估结果。
这个标准主要关注的是在陆上终端进行的样本采集和处理过程。在许多情况下,这些样本是在进行货物接收、存储和处理时采集的。标准的目的是提供一个可靠的方法,以确保样本的质量和完整性,并确保它们能够代表实际供应的燃料。
这个标准中还包含了一些关键的步骤和要求,包括样本的采集、存储、运输和处理。这些步骤和要求旨在确保样本的质量和准确性,并符合相关的法规和标准。
这个标准还提供了对亚甲醚(DME)和其他RNeP样本的分析方法。这些方法可能包括使用特定的仪器和设备来检测和分析样本中的成分和特性。
ISO29945标准对于确保陆上终端安全、高效和可靠的运营非常重要,并且对于评估和处理非石油类液化气燃料非常重要。
注意:该解释仅涉及了ISO29945:2016标准的一部分内容,该标准可能还包括其他方面的规定和要求。如果您需要更全面的信息,建议您查阅相关的文献资料或咨询相关领域的专家。
您可能关注的文档
- 国际标准 ISO 2974:2018 EN 柴油发动机 用于高压燃油喷射组件的 60° 内螺纹锥体 Diesel engines — 60° female cones for high-pressure fuel injection components.pdf
- 国际标准 ISO 2974:2018 EN Diesel engines — 60° female cones for high-pressure fuel injection components 柴油发动机 用于高压燃油喷射组件的 60° 内螺纹锥体.pdf
- 国际标准 ISO 2975-2:1975 EN 封闭导管中的水流测量 示踪剂方法 第2部分:使用非放射性示踪剂的恒定速率注入法 Measurement of water flow in closed conduits — Tracer methods — Part 2: Constant rate injection method using non-radioactive tracers.pdf
- 国际标准 ISO 2975-2:1975 EN Measurement of water flow in closed conduits — Tracer methods — Part 2: Constant rate injection method using non-radioactive tracers 封闭导管中的水流测量 示踪剂方法 第2部分:使用非放射性示踪剂的恒定速率注入法.pdf
- 国际标准 ISO 2975-3:1976 EN 封闭导管中的水流测量 示踪剂方法 第3部分:使用放射性示踪剂的恒定速率注入法 Measurement of water flow in closed conduits — Tracer methods — Part 3: Constant rate injection method using radioactive tracers.pdf
- 国际标准 ISO 2975-3:1976 EN Measurement of water flow in closed conduits — Tracer methods — Part 3: Constant rate injection method using radioactive tracers 封闭导管中的水流测量 示踪剂方法 第3部分:使用放射性示踪剂的恒定速率注入法.pdf
- 国际标准 ISO 2975-6:1977 EN 封闭导管中的水流测量 示踪剂方法 第6部分:使用非放射性示踪剂的通过时间法 Measurement of water flow in closed conduits — Tracer methods — Part 6: Transit time method using non-radioactive tracers.pdf
- 国际标准 ISO 2975-6:1977 EN Measurement of water flow in closed conduits — Tracer methods — Part 6: Transit time method using non-radioactive tracers 封闭导管中的水流测量 示踪剂方法 第6部分:使用非放射性示踪剂的通过时间法.pdf
- 国际标准 ISO 2975-7:1977 EN 封闭导管中的水流测量 示踪剂方法 第7部分:使用放射性示踪剂的通过时间法 Measurement of water flow in closed conduits — Tracer methods — Part 7: Transit time method using radioactive tracers.pdf
- 国际标准 ISO 2975-7:1977 EN Measurement of water flow in closed conduits — Tracer methods — Part 7: Transit time method using radioactive tracers 封闭导管中的水流测量 示踪剂方法 第7部分:使用放射性示踪剂的通过时间法.pdf
- 国际标准 ISO 29945:2016 EN Refrigerated non-petroleum based liquefied gaseous fuels — Dimethylether (DME) — Method of manual sampling onshore terminals 冷冻非石油类液化气体燃料 二甲醚(DME) 陆上码头人工采样方法.pdf
- 国际标准 ISO 2997:1974 EN 工业用磷酸 硫酸盐含量的测定 还原法和滴定法 Phosphoric acid for industrial use — Determination of sulphate content — Method by reduction and titrimetry.pdf
- 国际标准 ISO 2997:1974 EN Phosphoric acid for industrial use — Determination of sulphate content — Method by reduction and titrimetry 工业用磷酸 硫酸盐含量的测定 还原法和滴定法.pdf
- 国际标准 ISO 29981:2010 EN 奶制品 推定双歧杆菌计数 37 摄氏度菌落计数技术 Milk products — Enumeration of presumptive bifidobacteria — Colony count technique at 37 degrees C.pdf
- 国际标准 ISO 29981:2010 EN Milk products — Enumeration of presumptive bifidobacteria — Colony count technique at 37 degrees C 奶制品 推定双歧杆菌计数 37 摄氏度菌落计数技术.pdf
- 国际标准 ISO 29988-1:2019 EN 塑料 聚甲醛(POM)模塑和挤出材料 第1部分:指定系统和规范依据 Plastics — Polyoxymethylene (POM) moulding and extrusion materials — Part 1: Designation system and basis for specifications.pdf
- 国际标准 ISO 29988-1:2019 EN Plastics — Polyoxymethylene (POM) moulding and extrusion materials — Part 1: Designation system and basis for specifications 塑料 聚甲醛(POM)模塑和挤出材料 第1部分:指定系统和规范依据.pdf
- 国际标准 ISO 29988-2:2018 EN 塑料 聚甲醛(POM)模塑和挤出材料 第2部分:试样制备和性能测定 Plastics — Polyoxymethylene (POM) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties.pdf
- 国际标准 ISO 29988-2:2018 EN Plastics — Polyoxymethylene (POM) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties 塑料 聚甲醛(POM)模塑和挤出材料 第2部分:试样制备和性能测定.pdf
- 国际标准 ISO 29991:2020 EN 语言学习服务 要求 Language-learning services — Requirements.pdf
文档评论(0)