室外电缆沟施工方案、浙江某国家粮库及其附属工程施工组织设计.docx

电缆沟开挖施工方案

WorkMethodofCableTrenchExcavation

编制：Compiledby:

审核：Reviewedby:

2009年10月21日October21,2009

目录

Content

一.概况OVERVIEW 3

1.1工程概况PROJECTOVERVIEW 3

1.2施工范围SCOPEOFWORK 3

二.编制依据COMPILATIONBASIS 4

三.施工工艺流程CONSTRUCTIONPROCESS: 4

四.前期准备PREPARATIONS 4

4.1技术准备TECHNICALPREPARATION 4

4.2材料准备MATERIALPREPARATION 5

4.3主要机具准备MAINEQUIPMENTSPREPARATION 5

4.4作业环境准备OPERATINGENVIRONMENTPREPARATIONS 5

五.电缆沟施工CABLETRENCHCONSTRUCTION 5

5.1电缆沟测量、定位CABLETRENCHMEASUREMENTANDPOSITIONING 5

5.2电缆沟开挖CABLETRENCHEXCAVATION 6

六.质量控制QUALITYCONTROL 7

6.1电缆沟外形尺寸允许偏差表ALLOWABLEDEVIATEDEXTERNAL

DIMENSIONSOFCABLETRENCHTABLE 7

6.2应注意的质量问题QUALITYISSUES 8

七.成品保护FINISHEDPROTECTION 8

八.施工记录CONSTRUCTIONOFRECORD 8

九.安全生产、文明施工要求和措施SAFETYANDCIVILIZEDCONSTRUCTION

REQUESTSANDMEASURES 8

附厂区电缆沟图：ATTACHED:CABLETRENCHDRAWING 8

一.概况Overview

1.1工程概况ProjectOverview

项目名称：

本工程涉及三个变电站，分别是现有的220/35kVA472变电站、现有的35/10kVB301S变电站以及新建的35/10kVC581变电站，工作内容为三个变电站之间和从三个变电站接至MV用户的电力电缆、控制电缆、接地电缆敷设所需电缆沟的开挖工程。Theprojectinvolvesthreesubstations,namelytheexisting220/35kVA472substation,theexisting35/10kVB301Sthe35/10kVC581substationandanewsubstation.Thisisthepower,controlandgroundingcabletrenchexcavationprojectamongthreesubstationsandforMVusersconnectedtothethreesubstations.

1.2施工范围ScopeofWork

1)由A472变电站引出3路35kV出线。其中：

一路引至B301S建筑(35/10kV变电站)原1#主变，原1#主变电缆将抽出，与新增4#主变连接；另两路引至35/10kVC581变电站1#主变和2#主变。回路采用FS-YJY-26/35kV-1*300mm2单芯电缆，直埋敷设。去C581的两路35kV线路，敷设时沿不同路径，以避免两回线路同时受损。Pullthree35VoutgoingsfromA472substation.Ofwhich:

ThefirstoutgoingisledtoB301SBuilding(35/10kVsubstation)theoriginalone#maintransformer,pulltheoriginalone#maintransformercableout,andconnecttotheadding4#maintransformer;theothertwooutgoingsareledto35/10kVC581#1andsubstation