WSD-M13P7-A-20070928-润滑剂，扭矩 夹紧力控制-eng.pdf

ENGINEERINGMATERIALSPECIFICATION

LUBRICANT,TORQUE/CLAMPINGFORCECONTROLWSD-M13P7-A

1.SCOPE

Thisspecificationdefinestheperformancerequirementsforlubricantswhichareappliedtothreaded

partstoimpartspecifictorque/clampingforceproperties.

Itappliesforboththetestingofthelubricantandfortestingfinishedpartswhicharetreatedwithanyof

theapprovedlubricants.

2.APPLICATION

Thisspecificationwasoriginallyreleasedforbolts,screwsandnutswherecontrolofthetorque/clamping

forceperformanceisrequired.

3.REQUIREMENTS

3.1STANDARDREQUIREMENTSFORPRODUCTIONMATERIALS

MaterialsuppliersandpartproducersmustconformtotheCompanysStandardRequirements

ForProductionMaterials(WSS-M99P1111-A).

3.2APPLICATIONOFTHELUBRICANT

Finishedpartswillbereceivedinalubricatedcondition.Theresponsibilityforapplicationofthe

lubricantandmethodofapplicationshallbethatofthepartssupplier.

3.3FINISHEDCONDITION

ThepartsmustbedrytotouchsuchthatwhenheldwithaWatmansNo41filterpaper,or

equivalent,andapplyinghandpressurefor5to10seconds,thereshallbenovisiblestainingof

thefilterpaperwhenviewedwithoutusingsupplementarymagnification.Forrefereepurposes

thistestshallbecarriedoutusingaforceof10N.

Theremustbenosignificantchangeintheappearanceofthepartsafterapplicationofthe

lubricant.

3.4PERFORMANCEREQUIREMENTS

(WorldwideStandardPartsSystemWZ100/WZ