WSS-M21P28-A2-19980729-带有机聚合物调整摩擦系数的表面处理-chs.pdfVIP

WSS-M21P28-A2-1998

CORROSIONPROTECTIVECOATING,ORGANIC

POLYMER,FRICTION-MODIFIED共4页第1页

带有机聚合物调整摩擦系数的表面处理福特标准-表面处理

1.SCOPE

Thisspecificationdefinesthematerialandperformancecriteriaofacorrosion-protectiveandtorque-tension

enhancingcoatingconsistingofanorganicwater-bornetopcoatappliedtozincphosphatedferrousparts.

2.APPLICATION

Thisspecificationwasoriginallyreleasedasaneconomicalcorrosionprotectivecoatingupgradeforfastenersand

smallpartsinchassisexteriorapplicationswhereaphosphateandoilfinishwaspreviouslyused.Itisnotintendedfor

bodyinteriorapplications,hightemperatureapplications,applicationsindirectcontactwithplastics,applications

directlyexposedtosolvents,orareasofhighvisibility.

3.REQUIREMENTS

3.1QUALITYSYSTEMREQUIREMENTS

MaterialsuppliersandpartproducersmustconformtoqualitysystemrequirementsofQS-9000.Materialspecification

requirementsaretobeusedforinitialqualificationofmaterials.AControlPlanforongoingproductionverificationis

required.ThisplanmustbereviewedandapprovedbytherelevantFordMaterialsactivityand/orFordSupplier

TechnicalAssistance(STA)priortoproductionpartssubmission.Appropriatestatisticaltoolsmustbeusedtoanalyze

process/productdataandassureconsistentprocessingofthematerials.

PartproducersusingthismaterialintheirproductsmustuseFordapprovedmaterialsandmustconformtoaprocess

controlplanwhichhasbeenapprovedbySTAand/ortherelevantMaterialsactivity.

1.范围

本规范定义了一种由涂在磷酸锌铁件上的有机水性面漆组成的防腐蚀和抗扭力增强涂层的材料和性能标准。

2.应用

这个规范最初是作为一个经济的防腐涂层升级升级的紧固件和底盘外部应用的小部件的磷酸盐和油整理以前使