TR03 中国50th男性体征人体模型技术要求.pdf

C-NCAP管理规则

（2027年版）

TR03

中国50th男性体征人体模型

技术要求

中国汽车技术研究中心有限公司

目录

1总则········································································································1

2整体流程·································································································1

3认证要求·································································································1

3.1人体测量学要求················································································1

3.2结构要求·························································································2

3.3质量要求·························································································2

3.4输出要求·························································································3

3.5工况及评分要求················································································7

3.6模型一致性认证··············································································11

4文件及结果要求·······················································································12

1

1总则

人体模型（HumanBodyModel，HBM）在本规程中代表拥有骨骼、肌肉、内脏等完整身体结构

的有限元数字模型。用于虚拟测评的中国男性50th体征的HBM（以下简称HBM）应满足本规程的

各项认证要求，若不满足，则由该HBM计算生成的仿真结果视为无效，不能进行虚拟测评工作。

2整体流程

中国男性50th体征的HBM应满足本规程所有认证要求，具体流程如图1所示。认证要求包含

两部分：一是覆盖所有规定要求及载荷工况的全面性认证，二是用于虚拟测评前的模型一致性认证。

HBM产品需提供规定的各项文件及材料，用于评估模型体征及生物仿真度是否达到要求。若认证前

HBM默认配置为带鞋状态，则通过认证后进行虚拟测评时也需要保持相同配置。

所有参与虚拟测评的新开发的HBM产品必须进行全面性认证。全面性认证共5项，包括：人

体测量学要求、结构要求、质量要求、输出要求、工况及评分要求。HBM通过全面性认证后，为适

配不同工况环境，允许对HBM进行肢体调整，如四肢或头颈部，除此之外任何其他姿态改动都需

要重新对模型进行全面性认证。

由于通过全面性认证的HBM模型可能会发生姿态或配置改动，因此在进行虚拟测评前，HBM

需再通过一致性认证，证明模型的一致性。一致性认证仅包括全面认证中的部分工况以及评分要求，

在进行一致性工况认证时的HBM应与进行虚拟测评时的HBM保持姿态和配置一致。若HBM未通

过一致性认证，则需重新进行全面性认证。