采用先进可靠的设备，加快钢渣“零排放”.pdfVIP

采用先进可靠的设备，加快钢渣“零排放” 采用先进可靠的设备 ，加快钢渣“零排放” 夏 春 1 孙树杉 1 朱桂林 2 张 宇 2 （1. 中冶集团建筑研究总院环境保护研究设计院，北京 100088 ； 2. 中国京冶工程技术有限公司环境保护工程分公司，北京 100088） 摘 要 目前我国钢渣利用率仅为 10%，与国家要求的 2010 年利用率达到 86%以上相差甚远，为实现钢渣“零排 放”，国家将钢渣余热自解热闷处理工艺技术和卧式辊磨生产钢渣粉技术列为国家鼓励发展的环境保护技术和先进 污染防治示范技术。本文介绍了与这两项技术相配套的先进可靠的设备，以作为技术实施的支撑。其中包括钢渣热 闷处理设备、钢渣破碎、磁选、提纯设备和钢渣粉专用卧式辊磨。为企业进行钢渣“零排放”工程建设进行参考。 关键词 钢渣 “零排放”设备 Adopt Advanced Reliable Equipment, Speed Up Steel Slag “Zero Discharge ” Xia Chun1 Sun Shushan1 Zhu Guilin2 Zhang Yu2 （1. Environment Protection Branch Institute of Central Research Institute of Building and Construction, Beijing, 100088 ；2. Environment Protection Engineering Branch of China Jingye Engineering Co., Ltd., Beijing, 100088 ） Abstract Nowadays, steel slag’s utilization rate is only 10% in our country, it has a long way to go compared with the national demand which in 2010 the steel slag’s utilization rate should reach 86%. China has put steel slag steam pyrolytic and self-slaking technique and horomill used for ground steel slag technique into national encouraged environmental protection technique and advanced pollution prevention technique. This article has introduced advanced reliable equipment including steel slag steam pyrolytic and self-slaking equipment、steel slag crushing、magnetic 、purifying equipment and horomill special for ground steel slag complement with the two techniques as a support of technical implement. It supply a reference to enterprise’s steel slag “zero discharge ” engineering. Key words steel slag, “zero discharge ”, equipment 1 引言 钢渣是炼钢生产的必然产物，每炼1t 钢约产生12%~14%的钢渣。2006 年我国钢铁工业排出钢渣