【热门】-扣件式模板支架立杆的计算长度系数取值研究.pdfVIP

扣件式模板支架立杆的计算长度系数取值研究 　 曾凡奎 胡长明　葛召深 　闫　鑫 (西安建筑科技大学土木工程学院 , 西安 　7 10055) 　　摘 　要 : 针对模板支架扣件连接节点的半刚性特点 ,对直角扣件抗扭刚度进行试验研究 ,得到初始扭转 θ 刚度 R k 与直角扣件螺栓拧紧力矩 T 的关系式和在螺栓拧紧力矩 T = 40 N ·m 时 ,模板支架节点 M - 的二参 数对数非线性模型 。提出模板支架计算长度系数应考虑节点半刚性并基于有侧移框架理论进行计算 ,将得到 的结果与整架稳定承载力试验得到的计算长度系数相对比 ,得出考虑节点半刚性按照有侧移框架理论对模 ( ) 板支架进行设计是安全合理的 ,为相关规范 规程 的制定打下良好的理论基础 。 　　关键词 : 模板支架 ;节点半刚性 ;计算长度系数 ;有侧移框架 STUDY O N VAL UE O F EFFEC T IVE L ENGTH CO EFF IC IENT O F UPR INGT STA NCH IO N O F CO UPL ER STEEL TUBE FAL SEW O RK Zeng Fanku i　Hu Changm ing　Ge Zhao shen　Yan X in ( Schoo l of Civil Engineering, X i’an U n iversity of A rch itectu re and Technology, X i’an 7 10055, Ch ina) A b stract : Th is p ap er studied the torsional rigidity of coup lers for right angle intersection m em bers of falsework, ( wh ich were characterized by sem irigid joint. It wa s showed that in itial torsion stiffness R k and two p aram eters M - θ) logarithm ic non linear model of falsework joints was ob tained, who se bolt tighten ing torque T = 40 N ·m. The p ropo sed coefficien t for effective length of falsework shou ld con sider sem irigid joint w ith the calcu lation ba sed on sway fram e theory and then be comp ared w ith coefficien t for effective length given by the stab ility carrying cap acity te st of the overall falsework. The resu lts show