端盖落料拉深复合模和翻边冲孔复合模设计论文.doc

PAGE PAGE 1 摘 要 本文根据端盖的结构特点及技术要求通过对各工艺方案，进行比较设计了落料拉深复合模和翻边冲孔复合模，并利用proe cad 软件对其进行三维的分析。对工件进行了工艺计算确定了各零件的尺寸及结构。其中详细介绍了凸模、凹模、固定板、垫板、卸料板等零部件的设计与制造、以及压力机的选择和模架的选择。 关键词:冲压模具 工艺方案 复合模 零件 压力机 Abstrack plans,design the blanking-drawing gang dies and trimming-piercing gang dies, and carries on the three dimensional analysis using the UG software to itLaunched the process computation,determine the size and structure of all parts.In which in detail introduced the designs and the manufacture of convex die,concave die,fixed plante,pad,stripper plate ,as well as the press choice and thepould frame choice. Keywords: Punching die process plans gang dies a part a press Abstract Punching die has been widely used in industri This article based on design features and technical requirements of a gland,by analyzing process al production.In the traditional industrial production,the worker work very hard,and there are toomuch work,so the efficiency is low.With the development of the science and technology nowadays,the use of punching die in the industial production gain more attention, and be used in the industrial production more and more.Self-acting feed technology of punching die is also used in production, punching die could increase the efficience of production and could alleviate the work burden so it has significant meaning in technologic progress and the pould frame choice. 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc326704106 摘 要 PAGEREF _Toc326704106 \h I HYPERLINK \l _Toc326704107 Abstrack PAGEREF _Toc326704107 \h II HYPERLINK \l _Toc326704108 第1章 绪论 PAGEREF _Toc326704108 \h 1 HYPERLINK \l _Toc326704109 1.1本课题的概念及其背景 PAGEREF _Toc326704109 \h 1 HYPERLINK \l _Toc326704110 1.2冲压的变形特点及影响因素 PAGEREF _Toc326704110 \h 2 HYPERLINK \l _Toc326704111 1.2.1弹性变形阶段 PAGEREF _Toc326704111 \h 2 HYPERLINK \l _Toc326704112 1.2.2塑性变形阶段 PAGEREF _Toc326704112 \h 2 HYPERLINK \l _Toc326704113 1.2.3断裂分离阶段 PAGEREF _Toc326704113 \h 3 HYPERLINK \l _Toc326704114 1.3冲压件材料的分析