VBS软密封蝶阀说明书(英文).docVIP

1、summarization VBS pneumatic soft seal butterfly valve is the new generation of high performance quality product which assembled by pneumatic actuator and double eccentric high performance butterfly valve. It has fine cut-off function and lasting quality, and both the adjustment and cut-off functions of economical automatic valves are available. For the characteristic of big circulation ability, light weight, easy service of maintains, low leakage rate and high cost performance, it widely used in industrial process control or inflammable and explosive occasion such as metallurgy, petroleum, chemical industrial, electric power, food, water supply and gas supply, etc. 2、Structure and operating principle VBS soft seal butterfly valve is assembled by DA (SR), AW (AWS) series pneumatic piston actuator and VBS valve body parts (See Fig.1, Fig 2 and Fig.3). The valve can be matched with hand wheel and manual operated when the gas is failure. The valve can be either quick opening or closedown when assembled with solenoid valve, and if installed with positioner, the valve can be intelligentized. 1、Structure It is mainly composed of pneumatic piston actuator, valve body, disk, lock ring, valve shaft, joint sleeve, etc. Fig.1 The outline dimension of the valve and DA（SR）actuator combined Fig.2 The outline dimension of the valve and AW(S) combined 图3 配AW 双作用执行机构结构及外形尺寸图 Fig.3 The outline dimension of the valve and AW combined 2、Operating principle The input signal from actuator inputting in diaphragm gas room through pipe connection can produce thrust force on corrugated diaphragm, which drives the pallet moving and compresses the spring until balancing with counterforce of the spring. The moving of the pallet drives the push pole to move down. The top and bottom connecting rod linking with the push pole moves down to revolve the crank around the axes of butterfly