脉冲信号源系统的设计.docVIP

脉冲信号源系统的设计 The design of pulse signal source 学 院： 专 业 班 级： 学 号：学 生 姓 名：Abstract This paper studies the pulse signal source system design, according to the development situation of the domestic and foreign sources, This paper introduce is to use single chip microcomputer, direct digital synthesis frequency (DDS) and digital-to-analog converters produce the pulse signal source system, based on this design the hardware circuit to realize , and in the light of the functions of the source to design language C program , and the pulse signal source output signal amplitude, frequency, occupies empties can be controled through the process. This paper expounds the general idea of the signal source circuit design, introducing the synthesis of direct digital frequency (DDS) structure principle, system hardware circuit and software parts. Hardware circuit includes the introduction of DDS chip and its connection with the single chip microcomputer to realize signal output and single-chip microcomputer control part of the basic theory , digital-to-analog converters realize range and occupies emptiescompared adjustment function, the liquid crystal display and various peripheral part of the circuit design. This paper mainly introduces how to use single chip microcomputer control digital-to-analog converters and DDS chip produce frequency, amplitude, occupies empties adjustable pulse signal source system, so the core task of the design is single chip microcomputer as the core, combining digital-to-analog converters and DDS chip, with Altium designer09 hardware circuit design, through the keyboard control output signal frequency, amplitude, accounting for than empty, and Keil Uvision4 program, to realize the program control from the pulse signal. The pulse signal amplitude the frequency can be adjusted, occupies emptiescompared also can be adjusted. The hardware design from source to see, the reliable work, and the effect is good, and switching frequency speed, can not