串级，比值控制实验系统的设计.pdf

串级、比值控制实验系统的设计 串级、比值控制实验系统的设计 摘 要 基于我院自动化实验室现状，针对特定的实验装置，分别采用串级和比值控制方案，设计开 发基于串级和比值控制系统的实验方案。控制对象采用 EFAT/P-IIB 型过程控制实验系统，重点对 常规复杂控制系统设计及参数整定进行初步研究，。实验结果表明，基于EFAT/P-IIB 型过程控制 实验系统的串级、比值控制系统，能实现良好的控制，有助于自动化专业的学生工程设计能力的 培养，对自动化实验室建设和实验教学提供了一定的参考。 关键词：液位，比值控制，串级控制，调节器，控制器 Designing of the lab of the Control System of Tandem-level 、Ratio Han Wei-zhong Department of automation of information engineering College of Beijing Institue of Petrol-chemical technology,Beijing, Postcode 102617 Abstract At the base of the situation of the automation lab in our college, in allusion to the specifically experimental equipment, adopting the case of tandem-level and ratio control to design and develop the experimental case that basing of the tandem-level and ratio control. The object controlled is the system of process control experiment EFAT/P-IIB. The point is to research the designing of normal complex control-system and to draw up the parameter. The result shows that the control system of tandem-level and ratio basing on the system of process control experiment EFAT/P-IIB can do the good job to control and good to develop the project designing ability of students of automation and it supports the automation lab construction and the experimental teaching. Keywords: hydraulic pressure, ratio control, tandem-level control, adjuster, controller - 1 - 串级、比值控制实验系统的设计 目 录 摘要………………………………………………………………………………………………………1 abstract………………………………………………………………………………………………1 1 绪论…………………………………………