挖拔式木薯收获机的研制与样机试验.pdfVIP

第28 卷 增刊2 农 业 工 程 学 报 Vol.28 Supp.2 2012 年 10 月 Transactions of the Chinese Society of Agricultural Engineering Oct. 2012 29 Development and prototype trial of digging-pulling style cassava harvester 1 2 3 4 1 Liao Yulan , Sun Youpan , Liu Shihao , Cheng Danping , Wang Gaoping (1.College of Mechanical and Electrical Engineering, Hainan University, Haikou 570228, China; 2. Jian ’an Branch, China Changan Automobile GroupCo., Ltd. Ya ’an,625000, China; 3. College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China; 4. College of Mechanical and Electrical Engineering, Hainan Institute of Science and Technology, Haikou 571126, China) Abstract: Aim at the complexity of cassava tuber distributing in the soil, in order to harvest cassava tuber from different soils with a variety of hard levels, referencing the basic principles and structure of potatoes, garlic, sweet potatoes and other root crops harvesting machinery, a kind of digging-pulling style cassava harvester was developed based on cassava’s biological and physical characteristics, which can complete tuber’s digging, transportation, separation and other work simultaneously. The digging shovel, clamping conveyor and power transmission mechanism were designed and the key parameters were determined. The key parameters of the grizzly bar-type shovel is shovel’s plane angle of on more 20°, the shovel’s length of is 550 mm and shovel’s width is 1000 mm. The total transmission ratio is 2.29, gearbox’s tr