高强配筋剪力墙框－剪结构的地震行为研究.pdfVIP

华中科技大学学报(城市科学版) / J. of HUST. (Urban Science Edition), 2007, 24(4): 17-21. 高强配筋剪力墙框－剪结构的地震行为研究 1,2 1,2 1,2 1,2 缪志伟 ，陆新征 ，叶列平 ，姚震宇 （1.清华大学土木工程系，北京 100084 ；2.清华大学结构工程与振动教育部重点实验室） 摘 要 在框－剪结构的剪力墙中配置高强钢筋可以显著提高其安全储备，使得剪力墙在框架之后屈服， 并改变地震剪力的分配规律。本文利用 MSC.Marc 2005 以及清华大学在MSC.Marc 基础上开发的混凝土纤 维模型程序 THUFIBER 和适用于剪力墙结构非线性分析的分层壳墙单元模型，对高强配筋及普通配筋的两 个 8 层钢筋混凝土框－剪结构进行了静力推覆分析和三种实际地震波作用下的动力时程分析，重点研究了 高强钢筋对框－剪结构抗震性能控制的效果。研究结果表明，剪力墙中采用高强钢筋配筋后，改变了剪力 墙和框架的刚度退化规律，提高了剪力墙的屈服强度，且同时具有较好的极限变形能力，可以有效提高整 个结构的安全储备，对结构抗震是有利的。 关键词 框－剪结构 高强钢筋 静力推覆 动力 非线性 中图分类号：TU 7 文献标识码：A Study on the seismic performance of frame-shear wall structures with high-strength reinforced shear wall MIAO Zhiwei 1,2, LU Xingzheng 1,2, YE Lieping 1,2, YAO Zhenyu1,2 (1.Department of Civil Engineering, Tsinghua University, Beijing 100084, China; 2.Key Laboratory of Structural Engineering and Vibration of China Education Ministry, Tsinghua University, Beijing 100084, China) Abstract: High strength steel reinforcement in the shear walls of frame-shear wall structures can efficiently increase the safety margin and change the seismic force distribution because the shear wall will yield after the frame. With the fiber model program THUFIBER and the multi-layer-shell program, which are developed by Tsinghua University and are based on the general purpose finite element software of MSC.MARC, two 8-story reinforced concrete frame-shear wall structures, whose shear wall are reinforced with normal and high strength steel respectively, are studied with static pushover and dynamic analysis. The effect of high strength steel in the shear wall to the control of seismic performance of the structures is emphasized. Th