CA7620液压多刀半自动车床主传动箱设计.docx

 学 院 毕 业 设 计 (论文 ) 毕业设计(论文) CA7620 液压多刀半自动车床主传动箱设计 The Design of CA7620 Hydraulic Multi-tool Automatic Lathe Main Drive 学生 姓 名 学院 名 称 专业 名 称 指导 教 师 I  摘要 介绍 CA7620 机床主传动系统的设计步骤和设计方法，根据已确定的运动参数以变速 箱展开图的总中心距最小为目标，拟订变速系统的变速方案，并引入优化设计的思想，以 获得最优方案以及较高的设计效率。 此次设计过程中参考了同类机床主传动箱的设计， 机床的主传动箱的布局与 C7620 机床的类似， 高效机床，在生产中有着广泛的运用。 关键词: 机床；传动系统；优化设计 III  学 院 毕 业 设 计 (论文 ) Abstract This thesis introduces the design steps and methods of ma in transimisson system of machine tool and draft the transmission scheme of the system,which the aim of the most minima l center dista nce of expansion graph,accord ing to the motion parameter that has aeady been definited.Adopt the method of CAD and thought of odoptima l design to acqure the super ior project and higher design efficiencies. The process of designing a similar reference to the ma in transmission boxes of machine design, the key reference C7620 hydraulic machine, CA7620 machine ma in drive me with the la yout of the C7620 machine similar, CA7620 hydraulic multi-tool is hydraulic-d riven semi- automa tic lathes The efficient machine in the production of a wide range of use. Keywords : machine tool ma in transmission system IV optima l design   学 院 毕 业 设 计 (论文 ) 目 录 1绪论..........................................................................................................1 1.1主传动的设计要求................................................................................................................ 1 1.2主传动的组要设计程序....................................................................................................... 1 2主运动的运动设计........................................................................................2 1.1设计任务................................................................................................................................ 2 2.2拟定转速图..........................................................................................................