浸渗铜、铝对碳碳复合材料弯曲性能的影响.pdfVIP

3 1 11 机 械 工 程 材 料 Vo l. 31 No . 11 2007 11 M at e ials f o M echanical Eng inee ing N o v. 2007 / , , , ( 大连理工大学1. 材料科学与工程学院; 2. 三束材料改性联合国家重点实验室, 辽宁大连 116024) : 采用三点弯曲法 究浸渗铜和铝对碳/ 碳复合材料弯曲性能的影响, 分析了复合材料弯 曲断裂前后的组织形态, 并对弯曲性能进行了比较和探讨结果表明: 碳/ 碳+ 渗铜和碳/ 碳+ 渗铝 材料的抗弯强度分别达到88, 196 MP a, 大于碳/ 碳复合材料的77 M Pa; 金属铜铝对碳润湿性的差 异使碳/ 碳+ 渗铜界面结合强度弱于碳/ 碳+ 渗铝界面结合强度, 这导致碳/ 碳+ 渗铝抗弯强度远大 于碳/ 碳+ 渗铜的抗弯强度碳/ 碳+ 渗铜和碳/ 碳+ 渗铝抗弯强度都达到T B/ T 1842. 1- 2002 铁 道部行业标准电力机车粉末冶金滑板性能要求 : 受电弓滑板; 碳纤维; 弯曲性能; 浸渗 : T B333; U 264. 3 : A : 1000- 3738( 2007) 11- 0061-04 Effect of Infiltration Copper or Aluminium on Flexural Strength of C/ C Composite Materials YU Hong-yan, SHI iao-lei, U Fu-min, TAN Yi ( Dalian U niv e sity of T echnolog y, Dalian 116024, China) Abstract: T he flexu al st ength of C/ C co mpo site mate ials which infilt ated by co ppe o aluminium w as investig ated th ough the th ee- point bending metho d. T he esults indicate that the flex u al st eng th of C/ C+ Cu and C/ C+ Al is 88, 196 M Pa espectively , w hich is hig he than the C/ C co mpo site that is 77 M Pa. Because of the inte face jo ined intensity of C/ C+ A l is bette than C/ C+ Cu, the flexu a l st ength of C/ C+ A l is much highe than the C/ C+ Cu. Flexu al st ength of the C/ C+ Cu and C/ C+ Al have been up to even ex ceed the standa d T B/ T 1842. 1- 2002 fo the slides made v ia pow de met allu gy fo elect ic locomo tiv es. Key words: panto g aph slide ; ca bon fibe ; flex u al st ength; infilt atio n , 0 , , ; , , , [ 1, 2] , , ;