连铸机扇形段叉头的有限元分析#.pdfVIP

中国科技论文在线 连铸机扇形段叉头的有限元分析# 张正本，唐秋华，魏国前** （武汉科技大学机械自动化学院，武汉 430081） 5 摘要：连铸机扇形段中叉头常发生断裂事故，给炼钢厂造成极大停机损失。基于 Pro/E 完成 叉头三维实体建模，再用 HyperMesh 精细化剖分断裂部位的网格，最后集成到 ANSYS 实现 有限元分析；依据计算得到的叉头应力集中区和最大应力值，进一步追溯叉头发生疲劳破坏 的原因，提出了叉头结构设计时可采取的改进措施，并对改进方案进行强度校核，证明其有 效性。 10 关键词：连铸机；叉头；有限元分析 中图分类号：TH12 ，TF3411 ，TP391.9 文献标识码：A Finite Element Analysis of Clevis of Caster Segment Zhang Zhengben, Tang Qiuhua, Wei Guoqian 15 (College of Mech. Auto., Wuhan Univ. of Scie. and Tech., WuHan 430081) Abstract: Such accidents as the fatigue fracture of the fork head of the CCM segment happens all the time, and the shutdown of the machine as a result often causes a great loss to the steelmaking plant.This solution based on the Pro/E fork head 3D solid modeling,then the HyperMesh sophisticated split of the grid of the fracture position,and finally integrate them into the ANSYS to 20 realize finite element analysis.According to the calculation, well find the concentrated area of the stress and the maximum stress value of the fork head，tracing back the cause of the fatigue damage, putting forward some measures that we can take to improve the designation of the struction of the fork head.At last,well do some strength checking to prove the effectiveness of our improvement. 25 Keywords: Continuous casting machine; Clevis; Finite element analysis 0 引言 在工程结构分析中，有限元方法已成为应用最广泛、最有效的数值方法之一。ANSYS 作为通用的有限元软件，集结构、热、流体、电磁、声学于一体，广泛应用于机械、土木、 30 生物、医学等众多领域，基于ANSYS 的有限元研究是当前工程结构分析的重要应用方法。 在冶金设备中获得广泛应用，ANSYS 已成为冶金设备结构