Terminal滑模直驱风力发电变桨控制研究.pdfVIP

中国科技论文在线 Terminal 滑模直驱风力发电变桨控制研究# 刘军，张翠* （西安理工大学自动化与信息工程学院，西安 710048） 5 摘要：以直驱永磁同步风力发电机组为研究对象，以风速在额定值以上时使风力机输出功率 稳定在额定值为研究目标，针对传统变桨距控制存在功率波动大、有切换抖动、受干扰严重 等缺点，提出一种基于 Terminal 滑模控制的双模控制方法，所设计的控制器采用 Terminal 滑模控制，控制策略采用功率和转速同时进行控制。利用 MATLAB/SIMULINK 为实验平台， 搭建 Terminal 滑模直驱风力发电机变桨距控制模型，通过仿真验证，此方法与传统的变桨 10 距控制方法比较，有输出功率稳定无波动、无超调、消除了切换抖动、桨距角的变化更加平 滑、抗干扰性强等优点。 关键词：风能；直驱风力发电；变桨距控制；Terminal 滑模控制；双模控制 中图分类号：TP273 文献标识码：A 15 Direct-drive wind power pitch control based on Terminal sliding mode Lun Jun, Zhang Cui (Xian University of Technology, Institute of Automation and Information Engineering, Xi’an 710048) 20 Abstract: This paper use direct drive permanent magnet synchronous wind turbine as the object of the research, when the wind speed is greater than the rated value, make the motor output power stability in the rating as the goal of this study, for traditional pitch control has the Power fluctuations，Switch jitter and disturbed seriously shortcomings, it proposed a dual-mode control method which is based on Terminal SMC, that Terminal SMC as the controller, power and speed 25 while controlling as the control strategy. Use matlab/simulink as experimental platform to simulation，build Terminal sliding mode direct-drive wind turbine pitch control model, Simulation results show that compare to traditional pitch control, the new control method has the advantage of output power stability and jitter-free, no overshoo