基于MapX的消防疏散系统的实现.pdfVIP

中国科技论文在线 基于 MapX 的消防疏散系统的实现 郭婷婷，王哲龙** （大连理工大学控制科学与工程学院，辽宁大连 116024 ） 5 摘要：近年来，消防事业受到国家越来越多的关注，研究适应现代建筑特点的消防疏散系统 意义重大。本系统在地理信息系统 GIS 的基础上实现对建筑物的有效监控，可以在地图上 精确定位起火位置，并根据采集的火警及预案信息进行消防设备联动，进而提供可行的逃生 路线，实现直观、实时和快速的火灾指挥调度。本文在概述系统的基本原理和构成后，详细 介绍了系统在.NET 环境下利用C#语言对GIS 控件MapX 的二次开发过程，实现了GIS 与 10 消防疏散系统的有机结合，为消防疏散的高效实施提供一套可行的信息化解决方案。 关键词：GIS；疏散；MapX；二次开发；C# 中图分类号：TP31 The Implementation of Fire Protection and Evacuation 15 Indicate System Based on MapX GUO Tingting, WANG Zhelong (School of Control Science and Engineering, Dalian University of Technology, LiaoNing DaLian 116024) Abstract: In recent years，the cause of the fire receives more and more national attention. So it is 20 of great significance to study the evacuation indicate systems adapted to modern architectural characteristics. This system on the basis of geographic information system GIS to realize effective monitoring of the building, can position the location of the fire on the map precisely. According to the collection of fire alarm and plan information, it receives the linkage of fire-fighting equipment and then provides a possible escape route, for intuitive, real-time and rapid fire dispatch. After the 25 overview of the system of basic principle and composition, this paper introduces the development process of the system in detail. It is under the environment of .NET, using C# language to realize the secondary development of MapX which is a GIS component, and