温度与载荷对GH41695CrMnMo界面接触换热的影响.pdfVIP

40 6 () Vol.40 No.6 2009 12 Journal of Central South University (Science and Technology) Dec. 2009 GH4169/5CrMnMo ( 116085) GH4169 5CrMnMo 240~560 15.68 MPa 320 470 α δ TG115.25 A 1672−7207(2009)06−1568−05 Effect of temperature and load on contact heat transfer between GH4169 and 5CrMnMo XING Lei, ZHANG Li-wen, ZHANG Xing-zhi (School of Materials Science and Engineering, Dalian University of Technology, Dalian 116085, China) Abstract: Based on the principles of conduction heat transfer, a thermal contact model which was predigested rationally was established. Contact heat transfer coefficient between GH4169 super alloy and 5CrMnMo die steel was measured by the self-developed experiment setup using the steady state method. An empirical correlation was induced according to experimental data, and the results of calculation and experiment were compared. The results show that the interfacial temperature is 240−560 , the maximum contact load can reach 15.68 MPa. Contact heat transfer coefficient increases with the increase of interfacial temperature and contact load generally, but there exist minimum values near 320 and 470 . They affect contact heat transfer coefficient indirectly by varying the thermodynamics properties of materials together. Contact heat transfer coefficient can be predicted by the empirical correlation with amended coefficients α and δ, and agrees well with the experimental values. Key words: interfacial temperature; contact load; contact heat transfer coefficient; empirical correlation GH4169 −253~700 GH