【电子信息工程毕业设计+文献综述+开题报告】LED灯具遥控器测试系统设计与制作——总体设计与调试.doc

（20_ _届） 本科毕业设计 LED灯具遥控器测试系统设计与制作——总体设计与调试 摘 要 随着科学技术的快速发展，公司企业是产品生产已从传统的手工制作转为智能化流水线生产。为了提高公司在产品生产的质量检测环节的效率，本设计为公司的要求设计一个针对LED灯的红外检测系统。 本设计方案基于公司的需求，结合红外遥控设计简单、操作方便等特点，采用了51单片机作为红外发射接收芯片，IRM38BN作为红外一体化接收管，以及红外发光二极管作为发射管。在此基础上设计了一个简易的智能红外遥控测试系统。系统包括接收和发射两大部分，接收部分除了被检测LED灯外，设计在距离灯远处的不同点构建对灯的红外发射端，发射端可以根据操作人员的要求发出不同的红外码。几个发射端又由另外一个遥控器来控制，从而组成一个小型的红外网络。本文设计可以实现远程控制系统的运作，在几个定点对被测LED灯进行测试。 关键词：红外遥控，测试系统，红外发射，接收 Remote control LED lighting design and production test system - Overall design and debugging Abstract With the rapid development of science and technology, the company's production has convert from the traditional hand-made to intelligent production lines..In order to improve the efficiency of production's Inspection in the chain, should be the company to design a LED light for infrared detection system. The design scheme is based on the company's needs, combined with infrared remote control design is simple, convenient operation, using 51 MCU as the infrared transmitter receiver chip, IRM38BN integrated receiver tube as infrared and infrared light-emitting diodes as a launch tube.On this basis, the intelligent design of a simple infrared remote control test system.Receiving and transmitting system includes two parts, was detected in addition to receiving some LED lights, designed in the light away from the building on the different points of infrared light transmitter, the transmitter can be issued according to the requirements of operators of different infrared codes.Several transmitter and remote control by another control, which form a small infrared network.This article's designed can to achieve remote control operation of the system, test in several fixed-point of the LED lights. Keywords: Infrared Remote Control，Test System, Infrared emission,Infrared receiver 目录 摘 要 III Abstract IV 1 绪论 1 1.1课题的来源 1 1.2课题的意义 1 1.3红外检测系统的国内外发展现状 2 1.4课题研究的主要内容 2 2总体设计 4 2.1总体方案设计 4 2.2方案评价 5 3芯片器件与硬件设计介绍 7 3.1单片机AT89C52简介 7 3.1.1 单片机AT89C52总体介绍 7 3.1.2