江淮12变速箱体机械加工工艺及钻左右面孔工序夹具设计(全套CAD图纸).docVIP

江淮12变速箱体机械加工工艺及钻左右面孔工序夹具设计 摘 要 本课题是江淮12变速箱体机械加工工艺规程及钻左右面孔工序夹具设计。对于箱类体零件的加工主要是加工平面和孔系。加工时要注意平面和孔加工的先后顺序，先面后孔。工艺路线和选择定位基准是工艺规程设计的核心内容。制定工艺路线时，要注意定位基准的选取，特别是粗基准和精基准的的选择原则。机床选用组合机床，对于同类型的孔或面可以同时加工，提高了加工效率。根据加工需要制定出工艺过程卡和工序卡。确定每道工序的设备、工装、工序的余量、切削用量，机床主轴转速等参数。 夹具在机械加工中的应用十分广泛，有着很大的发展空间。机械夹具的要求结构简单，使用方便，制造精度高。本课题夹具选用的都是专用夹具，夹紧方式采用液压夹紧，与气动夹紧相比有许多的优点，能够提高生产效率，容易实现自动化夹紧，本课题夹具设计能够满足设计和加工要求。 关键词：工艺路线；工艺过程卡；工序卡；夹具；液压夹紧；自动化 The Designing of Process Plan and Fixture for Drilling Holes on Two Face for The JAC 12 Gear Box Abstract This topic is jianghuai 12 variable speed cabinet machining technology procedures and drill face process about fixture design.Processing should pay attention to the plane and hole processing, chronological order.The process route and choose the locating datum is the core content of the process planning. Formulated the process route, Should pay attention to the selection of the locating datum，Especially rough benchmark and the selection principle of pure benchmark. Machine tool selection combination machine tools, For the same type of holes or face can simultaneously processing, Improve the machining efficiency. According to processing need to formulate the process card and process card.Sure every process equipment, tooling, process headroom, cutting dosages, spindle speed parameters. The application in machining fixture is very extensive, Have a very big development space. Mechanical fixture is requirements of simple structure, Easy to use, manufacturing precision is high. This topic chosen fixture are special jig.Clamping means uses hydraulic clamping, Compared with pneumatic clamping many advantages, To increase the production efficiency, Easy to realize automation clamping, This topic fixture design can satisfy the design and processing requirements. Key words: Procedure; The process route; The process card; Process card; Jig; Hydraulic clamping; automation 目 录 引 言 - 1 - 绪 论 - 2 - 第1章 零件的工艺分析 - 4 - 1.1零件的作用 - 4 - 1.2 零件的工艺分析 - 4 - 第2章 工艺规程设