汽车变速器双联齿轮的激光焊接仿真分析.pdfVIP

网络出版时间：2013-07-01 14:09 网络出版地址：/kcms/detail/61.1133.TG1409.053.html 热加工工艺曳 2013 年7 月第42 卷第13 期 汽车变速器双联齿轮的激光焊接仿真分析 甘 伟 吴雄喜 (浙江工业职业技术学院, 浙江绍兴3 12000) 摘 要院基于计算机仿真技术 利用三维高斯圆锥热源模型对汽车变速箱双联齿轮激光焊接过程进行数值模拟遥 用纳米压痕法测量双联齿轮激光焊接后的残余应力分 并与仿真结果进行对比分析遥结果表明院建立的双联齿轮激光 焊接仿真模型在一定程度上成功地实现了对双联齿轮激光焊接过程焊接温度场尧残余应力的模拟 为优化双联齿轮激 光焊接工艺提供了理论依据和指导遥 关键词院变速器曰双联齿轮曰激光焊接曰仿真分析 中图分类号院TG456.7 文献标识码院A 文章编号院1001-3814(20 13) 13-0165-02 Simulation of Laser Welded Dual Gear Based on Computer Simulation Process GAN Wei, WU Xiongxi (Zheji ang Industry Polytechnic College, Shaoxing 312000, China) 库 Abstract 院Based on computer simulation technology, three-dimensional Gaussian tapered heat source was used to simulate laser welding automobile gearbox double gear process and the simulation results of the temperature field and welding 例 residual stress in the welding process were obtained. Nano-indentation method was used to detect the residual stress of laser 案 welding dual gear. In contrast with the simulation results, the results show that the laser welding dual gear heat source model E can effectively predict within a certain range welding temperature field, stress field and deformation in laser welding dual gear A n c process, which can provide a th