板坯连铸结晶器电磁制动和吹氩过程多相流动现象.pdfVIP

44  5 Vol.44 No.5 2008 5 619—625 ACTA METALLURGICA SINICA May 2008 pp.619–625 ∗
  (, 110004) ℄Æ℄, ℄ Æ. : ℄ ( Æ), , 5—50 µm ℄ 6.7% 3.3%; , 50 µm 8.9%; Æ , Æ , Æ ; ℄, 5— 50 µm 12.2%, 64.4%. , , ℄, TF777.1 A 0412−1961(2008)05−0619−07 MULTIPHASE FLOW PHENOMENA IN A SLAB CONTI- NUOUS CASTING MOLD WITH ELECTROMAG- NETIC BRAKE AND ARGON GAS INJECTION YU Haiqi, ZHU Miaoyong School of Materials and Metallurgy, Northeastern University, Shenyang 110004 Correspondent: ZHU Miaoyong, professor, Tel: (024) E–mail: myzhu@mail.neu.edu.cn Supported by National Natural Science Foundation of China and Bao Steel Co. (No, and Program for New Century Excellent Talents in University, Ministry of Education (No.NCET–04–0285) Manuscript received 2007–10–15, in revised form 2008–01–08 ABSTRACT A numerical simulation study for the multiphase phenomena of magnetic field, liquid steel flow field and inclusion behavior was described, in which the coupled effects of electromagnetic brake (EMBr) and argon gas injection in the slab continuous casting mold with high casting speed were considered. The effects of the EMBr and argon gas flow rate on the liquid steel flow and inclusion removal rate have been investigated. The results show that EMBr could slow down the flow velocity of liquid steel effectively, especially near the meniscus surface, but it had no helpful for the removal of small inclusions and the removal rate for the inclusion particles in diameter range of 5–50 m reduced from 6.7% without EMBr and argon