刀具径向磨损测量装置设计【毕业论文】.docVIP

本科毕业论文 （20 届） 刀具径向磨损测量装置设计摘 要本旨在设计一种接触式的刀具磨损测量装置，通过该装置可直接测得刀具的径向磨损 Abstract In the system of modern manufacture，in order to ensure the safety and machining quality of the automated processing equipment,it is urgem to solve the problem of monitoring. Cutting tool is one of the most important factors in the machining process. Tool wear will not only affect the quality and precision of the products，but also may destroy the machine and the workpieees，even endanger workers’lives. In addition,due to the diversity of processing conditions．The variability of cutting parameters and tool wear,it makes the condition monitoring of the cutting tools， become amajor taebe in the entire manufacture process． The project aims to design a tool wear-contact measuring device, through the device can be directly measured radial tool wear. Here the main tool which is most of the turning tools. This design principle is the traditional measurement of surface roughness of the working principle - also known as needle depiction of law. When the stylus directly on the gently across the surface of the workpiece under test, because the measured surface profile peak and downs, stylus in the direction perpendicular to the surface of the measured profile up and down. This move by the dial gauge pointer moves into their range or specific reading, and reading through the range of movement or the analysis, the tool wear conditions. 朗读 显示对应的拉丁字符的拼音 朗读 显示对应的拉丁字符的拼音 朗读 显示对应的拉丁字符的拼音 Measuring device designed for this project structure is dominated by clamping systems,guide pair,measuring system,through the connection pieces and assembled fixture. For the design of this measuring device, based on previous analysis and comparison of design, select the most reasonable basis for design. On the basis of innovation on the program, all part of the structure of the device were compared to select the most appropriate structure, so that the design of the device in the measurement of tool wear, the advantages of the