多系统GNSS数据质量检测软件BQC的算法与性能.pdfVIP

第五届中国卫星导航学术年会电子文集 The algorithms and performances of a new multi-GNSS data quality check toolkit Huicui Liu, Geshi Tang, Hongzheng Cui, Baiyan Song, Tianpeng Ren National Key Laboratory of Science and Technology on Aerospace Flight Dynamics, Beijing Aerospace Control Center, Beijing, China hcliu_bacc@163.com Abstract: Multi-GNSS networks, for example M-GEX and iGMAS, are set up and grow quickly with the development of new navigation systems and multi-GNSS receivers. However, few data quality checking (QC) software can process measurements of new navigation systems or even new signals from established GNSSs, for example GPS. This paper introduces the BQC software, a multi-GNSS data QC toolkit which can process multi-frequency measurements of GPS/GLONASS/Beidou/Galileo/SBAS/QZSS recorded in RINEX version 2 or 3 formats. QC outputs of BQC are written in QC report files as well as plotted in QC figure files. BQC can process multi observation files at a time and useful information of all files is shown in one figure file to help users have a quick and visual browse. The key algorithm of BQC is emphasized in this paper. Compared with TEQC, which is currently the most widely-used GNSS data QC software, BQC improves the flexibility in multi-GNSS applications, reduces the probability of false cycle-slip detection and redundancy of dealing with multi-frequency measurements, and repairs cycle-slips in multipath-affected measurement sequences more reliably. Keywords: GNSS; M-GEX; iGMAS; quality check; RINEX 多系统GNSS数据质量检测软件BQC的算法与性能 刘荟萃，唐歌实，崔红正，宋柏延，任天鹏 航天飞行动力学技术国家级重点实验室，北京航天飞行控制中心，北京，中国，100094 hcliu