阐述容器制造中复合板材的下料排版工艺.docVIP

阐述容器制造中复合板材的下料排版工艺 常用的压力容器复合钢板是以某种钢作为基层,以另一种钢或有色金属作为复层,通过热轧或爆炸成型工艺等方法复合而成的双金属板。其基层主要满足结构强度和刚度的要求,一般用低碳钢或低合金钢;而复层主要是满足耐腐蚀性的要求,一般用铬或铬镍不锈钢、镍基合金、铜基合金或钛板。复层通常只占总厚度的10 %～20 %。因此,复合钢板既有优质或贵重金属具备的特殊性能(如耐蚀性),又可以节约大量的不锈钢或钛等贵重金属,在保证技术要求的同时可大幅降低成本,具有很大的经济价值。因此,复合钢板在石油、化工、航海、医疗、食品行业和军工生产中得到越来越广泛的应用。 Composite steel plate is a commonly used pressure vessel steel as base, another steel or nonferrous metals as cladding, through methods such as hot rolled or explosion molding process of composite double metal plate. Its base is meet the requirements of structural strength and stiffness, usually in low carbon steel or low alloy steel; Cladding and mainly satisfy the requirement of corrosion resistance, generally with chrome or nickel chromium stainless steel, nickel base alloy, copper base alloy or titanium plate. Stratified usually only 10% ~ 20% of total thickness. Therefore, composite steel plate both quality or precious metals possess special performance (such as corrosion resistance, and can save large amount of precious metals such as stainless steel or titanium, in ensuring technical requirements at the same time can greatly reduce costs, have great economic value. Therefore, composite steel plate in petroleum, chemical, Marine, medical, food industry and military production get more and more widely used. But due to the pressure vessel with composite plates are generally in the petrochemical industry has significant dangerous environments, such as use, both under pressure, working medium and are almost have strong corrosion effects of material; And because of the pressure vessel with composite plates more stringent manufacturing processes, general manufacturers because of less contact, technology is not mature, the manufacturing will often appear some problems, such as cylinder baiting size not appropriate, weld creep rupture, etc. Therefore, this article will mainly talk about the manufacturing process of the pressure container with composite plates and requirements, f