3毕业设计外文资料翻译.docVIP

毕业设计外文资料翻译 题 目 学 院 专 业 班 级 学 生 学 号 指导教师 年 月 日 Measurement 40 (2007) 791–796 Continuous weighing on a multi-stage conveyor belt with FIR filter Ryosuke Tasaki , Takanori Yamazaki, Hideo Ohnishi ,Masaaki Kobayashi, Shigeru Kurosu Department of Mechanical Engineering, Kyoto Institute of Technology, Japan Department of Mechanical Engineering, Oyama National College of Technology, 771 Nakakuki, Oyama 323-0806, Japan Department of Engineering, Shinko Co., Ltd., 4219-71 Takasai, Shimotsuma 304-0031, Japan Research Institute, Crotech, Japan Received 13 January 2006; received in revised form 23 March 2006; accepted 11 May 2006Available online 2 June 2006 Abstract Today higher speed of operation and highly accurate weighing of packages during crossing a conveyor belt has been getting more important in the food and distribution industries etc. Continuous weighing means that masses of discrete packages on a conveyor belt are automatically determined in sequence. Making the proper use of new weighing scale called a multi-stage conveyor belt scale which can be created so as to adjust the conveyor belt length to the product length, we propose a simplified and effective mass estimation algorithm under practical vibration modes. Conveyor belt scales usually have maximum capacities of less than 80 kg and 140 cm, and achieve measuring rates of 150 packages per minute and more. The output signals from the conveyor belt scales are always contaminated with noises due to vibrations of the conveyor belt and the product in motion. In this paper digital filter of finite-duration impulse response (FEB) type is designed to provide adequate accuracy. The experimental results on conveyor belt scales suggest that the filtering algorithm proposed here is effective enough to practical applications. As long as spaces between successive products are set within a specified range, the prod